Description
- Create a perfect, vibrating silicone copy of any penis and balls safely and easily in the comfort of your own home
- Medically tested molding gel captures incredible lifelike detail
- Fun and easy to do
- Comes with everything you need
- Mix up the latex insert an erect penis and let it set
AmazonObsessed 5115 –
Good product. Got it to work on the second try. First time when I put my penis into the mold tube it pushed all the molding gel out the back end. Directions never said to tape the back end but make sure you do. It was a heck of a clean up but the second attempt worked. I suggest getting the one without the balls. When I did it my balls got pushed forward and it essentially takes an inch or so off your length.
Jim M. –
It works very well, it is kind of hard to keep a good hard erection for the molding process though, penis ring recommended. Only complaint is the silicon is very hard so my girlfriend says it kind of hurts to use since a real penis is soft and has give too it, she says it feels too thick. It also has quite a few air bubbles in the silicon after making the clone, so the silicon mixture could be improved, but it does include a vibrator which can be removed and used to help her get off so that nice
Jack Stretch –
The mold creates air bubbles that will ruin the final product. The silicone they give you also creates air bubbles and holes that make it very rough. The vibrator sticks off to the side of the wall of the product. The instructions on how to avoid any of this is completely missing from the instruction manual. If I could go back I wouldn’t get the plus balls and instead just get the regular one that way at least you’re getting the replica to the full length of your actual penis.
Amazon Customer –
NOT discreet packaging. Very disappointed in the lack of discretion. Ordered this product on here because I wanted it to be discreet, but instead there is a giant sticker that says what the product is on the outside of the package. Not cool. Plus, what if this had been a gift!?!
Kellas k. –
So the girlfriend and I had fun with this. Read the instructions! Water temperature is important! Timing is very important! It is messy but does clean up very easy. The tub is an ideal place to stand when you are doing this. The first go around with the mold was a bust. The second time we only mixed for 35 seconds instead of 45. Big help with it not setting up as fast. Ofcourse I being me I thought some things thru probably a little to much but. The end product was great. I bend over and inserted everything and reached around with my hand to cup the back of the berries area and stood up to try and get it to flow around them a little extra. It actually worked well. Wait as long as you can 2-3 minutes and slowly and gently take everything out. Now I had read some of the reviews on the “regular” kits and some people on the larger side didn’t have enough silicone. And being that I was attempting to get a little extra molding of the berries I decided to order extra silicone. So I also bought the 4oz ” regular” refill kit. It was perfect and would not have been enough with out it. We waited the 24 hour for it to cure. And it came out a great. A couple minor imperfections where evident because it had touched the edge of the tube. A there was an air bubble. Definitely pouring in the silicon slowly is key to avoid that. She opted not to put the vibrater in on this one so in the future we may get the plaster kit and silicone refill kit again. It was a fun silly thing to do together.
Kellas k. –
The cap came off of the tube and spilled the mold liquid everywhere
AmazonObsessed 5115 –
Hard to really review accurately because I haven’t produced a finished product yet. But here’s what I can tell you.
An inexpensive whisk is helpful for mixing. Since you have only two minutes to mix and mold, reducing the mix time is helpful.
The black cap on the end of the tube has to support the weight of the molding material and the pressure of inserting the subject. Duct tape it in place. Mine let go and molding material went everywhere. The folks at Empire labs were nice enough to send replacement molding powder because of this mishap.
If your erections are not especially durable, this is going to be tough sledding. I found it very hard (no pun intended) to stay ready while mixing.
Courtney –
This was, by far, the most disgusting package I have ever received. The whole package, inside and out, was covered in a clear greasy substance that would not wash off in anything.
Anonymous Purchaser –
They give you two molds incase you mess up however one mold was not enough and by the time you get it in the container it was already hard. All of this was done within the 2 minutes they say to do it in. Very disappointing since my man is leaving and we won’t see eachother for a long time.